%\VignetteIndexEntry{AnnotationDbi: Introduction To Bioconductor Annotation Packages}
%\VignetteDepends{org.Hs.eg.db, TxDb.Hsapiens.UCSC.hg19.knownGene, hom.Hs.inp.db, EnsDb.Hsapiens.v75}
%\VignetteKeywords{annotation, database}
%\VignettePackage{AnnotationDbi}
%\VignetteEngine{knitr::knitr}

\documentclass[11pt]{article}

<<style, eval=TRUE, echo=FALSE, results='asis'>>=
BiocStyle::latex()
@

%% Question, Exercise, Solution
\usepackage{theorem}
\theoremstyle{break}
\newtheorem{Ext}{Exercise}
\newtheorem{Question}{Question}

\newenvironment{Exercise}{
  \renewcommand{\labelenumi}{\alph{enumi}.}\begin{Ext}%
}{\end{Ext}}
\newenvironment{Solution}{%
  \noindent\textbf{Solution:}\renewcommand{\labelenumi}{\alph{enumi}.}%
}{\bigskip}

\title{AnnotationDbi: Introduction To Bioconductor Annotation Packages}
\author{Marc Carlson}

<<include=FALSE>>=
library(knitr)
opts_chunk$set(tidy=FALSE)
@

\begin{document}

\maketitle

\begin{figure}[ht]
\centering
\includegraphics[width=.6\textwidth]{databaseTypes.pdf}
\caption{Annotation Packages: the big picture}
\label{fig:dbtypes}
\end{figure}

\Bioconductor{} provides extensive annotation resources. These can be
\emph{gene centric}, or \emph{genome centric}. Annotations can be
provided in packages curated by \Bioconductor, or obtained from
web-based resources.  This vignette is primarily concerned with
describing the annotation resources that are available as
packages. More advanced users who wish to learn about how to make new
annotation packages should see the vignette titled "Creating select
Interfaces for custom Annotation resources" from the
\Rpackage{AnnotationForge} package.

Gene centric \Rpackage{AnnotationDbi} packages include:
\begin{itemize}
  \item Organism level: e.g. \Rpackage{org.Mm.eg.db}.
  \item Platform level: e.g. \Rpackage{hgu133plus2.db},
        \Rpackage{hgu133plus2.probes}, \Rpackage{hgu133plus2.cdf}.
  \item Homology level: e.g. \Rpackage{hom.Dm.inp.db}.
  \item System-biology level: \Rpackage{GO.db}
\end{itemize}
Genome centric \Rpackage{GenomicFeatures} packages include
\begin{itemize}
  \item Transcriptome level:
    e.g. \Rpackage{TxDb.Hsapiens.UCSC.hg19.knownGene},
    \Rpackage{EnsDb.Hsapiens.v75}.
  \item Generic genome features: Can generate via \Rpackage{GenomicFeatures}
\end{itemize}
One web-based resource accesses
\href{http://www.biomart.org/}{biomart}, via the \Rpackage{biomaRt}
package:
\begin{itemize}
  \item Query web-based `biomart' resource for genes, sequence,
        SNPs, and etc.
\end{itemize}

The most popular annotation packages have been modified so that they
can make use of a new set of methods to more easily access their
contents.  These four methods are named: \Rfunction{columns},
\Rfunction{keytypes}, \Rfunction{keys} and \Rfunction{select}.  And
they are described in this vignette.  They can currently be used with
all chip, organism, and \Rclass{TxDb} packages along with the popular
GO.db package.

For the older less popular packages, there are still conventient ways
to retrieve the data.  The \emph{How to use bimaps from the ".db"
  annotation packages} vignette in the \Rpackage{AnnotationDbi}
package is a key reference for learnign about how to use bimap
objects.

Finally, all of the `.db' (and most other \Bioconductor{} annotation
packages) are updated every 6 months corresponding to each release of
\Bioconductor{}.  Exceptions are made for packages where the actual
resources that the packages are based on have not themselves been
updated.

\subsection{AnnotationDb objects and the select method}

As previously mentioned, a new set of methods have been added that
allow a simpler way of extracting identifier based annotations.  All
the annotation packages that support these new methods expose an
object named exactly the same as the package itself.  These objects
are collectively called \Rclass{AnntoationDb} objects for the class
that they all inherit from.  The more specific classes (the ones that
you will actually see in the wild) have names like \Rclass{OrgDb},
\Rclass{ChipDb} or \Rclass{TxDb} objects.  These names correspond to
the kind of package (and underlying schema) being represented.  The
methods that can be applied to all of these objects are
\Rfunction{columns}, \Rfunction{keys}, \Rfunction{keytypes} and
\Rfunction{select}.

In addition, another accessor has recently been added which allows
extraction of one column at at time.  the \Rfunction{mapIds} method
allows users to extract data into either a named character vector, a
list or even a SimpleCharacterList.  This method should work with all
the different kinds of \Rclass{AnntoationDb} objects described below.

\subsection{ChipDb objects and the select method}

An extremely common kind of Annotation package is the so called
platform based or chip based package type.  This package is intended
to make the manufacturer labels for a series of probes or probesets to
a wide range of gene-based features.  A package of this kind will load
an \Rclass{ChipDb} object.  Below is a set of examples to show how you
might use the standard 4 methods to interact with an object of this
type.

First we need to load the package:

<<loadChip>>=
library(hgu95av2.db)
@

If we list the contents of this package, we can see that one of the
many things loaded is an object named after the package "hgu95av2.db":

<<listContents>>=
ls("package:hgu95av2.db")
@

We can look at this object to learn more about it:

<<show>>=
hgu95av2.db
@

If we want to know what kinds of data are retriveable via
\Rfunction{select}, then we should use the \Rfunction{columns} method
like this:

<<columns>>=
columns(hgu95av2.db)
@

If we are further curious to know more about those values for columns,
we can consult the help pages.  Asking about any of these values will
pull up a manual page describing the different fields and what they
mean.

<<help, eval=FALSE>>=
help("SYMBOL")
@

If we are curious about what kinds of fields we could potentiall use
as keys to query the database, we can use the \Rfunction{keytypes}
method.  In a perfect world, this method will return values very
similar to what was returned by \Rfunction{columns}, but in reality,
some kinds of values make poor keys and so this list is often shorter.

<<keytypes>>=
keytypes(hgu95av2.db)
@

If we want to extract some sample keys of a particular type, we can
use the \Rfunction{keys} method.

<<keys>>=
head(keys(hgu95av2.db, keytype="SYMBOL"))
@

And finally, if we have some keys, we can use \Rfunction{select} to
extract them.  By simply using appropriate argument values with select
we can specify what keys we want to look up values for (keys), what we
want returned back (columns) and the type of keys that we are passing
in (keytype)

<<selectChip>>=
#1st get some example keys
k <- head(keys(hgu95av2.db,keytype="PROBEID"))
# then call select
select(hgu95av2.db, keys=k, columns=c("SYMBOL","GENENAME"), keytype="PROBEID")
@

And as you can see, when you call the code above, select will try to
return a data.frame with all the things you asked for matched up to
each other.

Finally if you wanted to extract only one column of data you could
instead use the mapIds method like this:

<<mapIdsChip>>=
#1st get some example keys
k <- head(keys(hgu95av2.db,keytype="PROBEID"))
# then call mapIds
mapIds(hgu95av2.db, keys=k, column=c("GENENAME"), keytype="PROBEID")
@

\subsection{OrgDb objects and the select method}

An organism level package (an `org' package) uses a central gene
identifier (e.g. Entrez Gene id) and contains mappings between this
identifier and other kinds of identifiers (e.g. GenBank or Uniprot
accession number, RefSeq id, etc.).  The name of an org package is
always of the form \emph{org.<Ab>.<id>.db}
(e.g. \Rpackage{org.Sc.sgd.db}) where \emph{<Ab>} is a 2-letter
abbreviation of the organism (e.g. \Rpackage{Sc} for
\emph{Saccharomyces cerevisiae}) and \emph{<id>} is an abbreviation
(in lower-case) describing the type of central identifier
(e.g. \Rpackage{sgd} for gene identifiers assigned by the
Saccharomyces Genome Database, or \Rpackage{eg} for Entrez Gene ids).

Just as the chip packages load a \Rclass{ChipDb} object, the org
packages will load a \Rclass{OrgDb} object.  The following exercise
should acquaint you with the use of these methods in the context of an
organism package.

%% select exercise
\begin{Exercise}
  Display the \Rclass{OrgDb} object for the \Biocpkg{org.Hs.eg.db}
  package.

  Use the \Rfunction{columns} method to discover which sorts of
  annotations can be extracted from it. Is this the same as the result
  from the \Rfunction{keytypes} method?  Use the \Rfunction{keytypes}
  method to find out.

  Finally, use the \Rfunction{keys} method to extract UNIPROT
  identifiers and then pass those keys in to the \Rfunction{select}
  method in such a way that you extract the gene symbol and KEGG
  pathway information for each.  Use the help system as needed to
  learn which values to pass in to columns in order to achieve this.
\end{Exercise}
\begin{Solution}
<<selectOrg1>>=
library(org.Hs.eg.db)
columns(org.Hs.eg.db)
@
<<selectOrg2, eval=FALSE>>=
help("SYMBOL") ## for explanation of these columns and keytypes values
@
<<selectOrg3>>=
keytypes(org.Hs.eg.db)
uniKeys <- head(keys(org.Hs.eg.db, keytype="UNIPROT"))
cols <- c("SYMBOL", "PATH")
select(org.Hs.eg.db, keys=uniKeys, columns=cols, keytype="UNIPROT")
@
\end{Solution}

So how could you use select to annotate your results? This next
exercise should hlep you to understand how that should generally work.

\begin{Exercise}
  Please run the following code snippet (which will load a fake data
  result that I have provided for the purposes of illustration):

<<selectData>>=
load(system.file("extdata", "resultTable.Rda", package="AnnotationDbi"))
head(resultTable)
@

  The rownames of this table happen to provide entrez gene identifiers
  for each row (for human).  Find the gene symbol and gene name for
  each of the rows in resultTable and then use the merge method to
  attach those annotations to it.
\end{Exercise}
\begin{Solution}
<<selectOrgData>>=
annots <- select(org.Hs.eg.db, keys=rownames(resultTable),
                 columns=c("SYMBOL","GENENAME"), keytype="ENTREZID")
resultTable <- merge(resultTable, annots, by.x=0, by.y="ENTREZID")
head(resultTable)
@
\end{Solution}

\subsection{Using select with GO.db}

When you load the GO.db package, a \Rclass{GODb} object is also
loaded. This allows you to use the \Rfunction{columns},
\Rfunction{keys}, \Rfunction{keytypes} and \Rfunction{select} methods
on the contents of the GO ontology.  So if for example, you had a few
GO IDs and wanted to know more about it, you could do it like this:

<<selectGO>>=
library(GO.db)
GOIDs <- c("GO:0042254","GO:0044183")
select(GO.db, keys=GOIDs, columns="DEFINITION", keytype="GOID")
@

\subsection{Using select with TxDb packages}

A \Rclass{TxDb} package (a 'TxDb' package) connects a set of genomic
coordinates to various transcript oriented features.  The package can
also contain Identifiers to features such as genes and transcripts,
and the internal schema describes the relationships between these
different elements.  All TxDb containing packages follow a specific
naming scheme that tells where the data came from as well as which
build of the genome it comes from.

%% select exercise TxDb
\begin{Exercise}
  Display the \Rclass{TxDb} object for the
  \Biocpkg{TxDb.Hsapiens.UCSC.hg19.knownGene} package.

  As before, use the \Rfunction{columns} and \Rfunction{keytypes}
  methods to discover which sorts of annotations can be extracted from
  it.

  Use the \Rfunction{keys} method to extract just a few gene
  identifiers and then pass those keys in to the \Rfunction{select}
  method in such a way that you extract the transcript ids and
  transcript starts for each.
\end{Exercise}
\begin{Solution}
<<selectTxDb>>=
library(TxDb.Hsapiens.UCSC.hg19.knownGene)
txdb <- TxDb.Hsapiens.UCSC.hg19.knownGene
txdb
columns(txdb)
keytypes(txdb)
keys <- head(keys(txdb, keytype="GENEID"))
cols <- c("TXID", "TXSTART")
select(txdb, keys=keys, columns=cols, keytype="GENEID")

@
\end{Solution}

As is widely known, in addition to providing access via the
\Rfunction{select} method, \Rclass{TxDb} objects also provide access
via the more familiar \Rfunction{transcripts}, \Rfunction{exons},
\Rfunction{cds}, \Rfunction{transcriptsBy}, \Rfunction{exonsBy} and
\Rfunction{cdsBy} methods.  For those who do not yet know about these
other methods, more can be learned by seeing the vignette called:
\emph{Making and Utilizing TxDb Objects} in the
\Rpackage{GenomicFeatures} package.

\subsection{Using select with EnsDb packages}

Similar to the \Rclass{TxDb} objects/packages discussed in the
previous section, \Rclass{EnsDb} objects/packages provide genomic
coordinates of gene models along with additional annotations
(e.g. gene names, biotypes etc) but are tailored to annotations
provided by Ensembl. The central methods \Rfunction{columns},
\Rfunction{keys}, \Rfunction{keytypes} and \Rfunction{select} are all
implemented for \Rclass{EnsDb} objects. In addition, these methods
allow also the use of the \Rclass{EnsDb} specific filtering framework
to retrieve only selected information from the database (see vignette
of the \Rpackage{ensembldb} package for more information).

In the example below we first evaluate which columns, keys and
keytypes are available for \Rclass{EnsDb} objects and fetch then the
transcript ids, genomic start coordinate and transcript biotype for
some genes.

<<selectEnsDb>>=
library(EnsDb.Hsapiens.v75)
edb <- EnsDb.Hsapiens.v75
edb

## List all columns
columns(edb)

## List all keytypes
keytypes(edb)

## Get the first
keys <- head(keys(edb, keytype="GENEID"))

## Get the data
select(edb, keys=keys, columns=c("TXID", "TXSEQSTART", "TXBIOTYPE"), 
       keytype="GENEID")
@

We can modify the queries above to retrieve only genes encoded on
chromosome Y. To this end we use filter objects available for
\Rclass{EnsDb} objects and its methods.

<<selectEnsDb.Y>>=
## Retrieve all gene IDs of all lincRNAs encoded on chromosome Y
linkY <- keys(edb,
              filter=list(GenebiotypeFilter("lincRNA"), SeqnameFilter("Y")))
length(linkY)

## We get now all transcripts for these genes.
txs <- select(edb, keys=linkY, columns=c("TXID", "TXSEQSTART", "TXBIOTYPE"),
              keytype="GENEID")
nrow(txs)

## Alternatively, we could specify/pass the filters with the keys argument.
txs <- select(edb, keys=list(GenebiotypeFilter("lincRNA"), SeqnameFilter("Y")),
              columns=c("TXID", "TXSEQSTART", "TXBIOTYPE"))
nrow(txs)
@

The version number of R and packages loaded for generating the
vignette were:

<<SessionInfo, echo=FALSE>>=
sessionInfo()
@

\end{document}
